Related Products
- 2012 Brazil iron sand exportation will obviously decrease
- India increases iron ore export tax to 30%
- The first season next year in Japan, the crude copper maybe the lowest
- American steel corporation up regulation the strip price
- JFE steel corporation plan to reduce production in the forth season
- Xinjiang will appear the largest copper ore mountain
- India enterprises are looking for government-based bid and exploring Afghanistan iron ore project
- West Africa mine ore exploration
Popular Products
Aluminum Braze Sheet
Contact nowBrazing/Brazing Sheet
Some aluminum sheet products are made up of a strong core aluminum alloy that is clad with a thin layer of high-silicon alloy which has a much lower melting point than the core. This allows a complex shape, such as a car radiator, to be fabricated then heated to a temperature that is sufficient to melt the cladding while leaving the core intact. The thin skin of oxide film that covers the surface of the aluminum needs to be removed for effective brazing. There are three common brazing methods:
Flux-Dip Brazing
The component is immersed in a molten salt which acts as a flux as well as a heat source for melting the clad layer. The fluxes are corrosive and all traces must be removed after aluminum brazing.
Controlled Atmosphere Brazing
Sometimes also described by the trade name "Nacoloc"®, this process uses a non-corrosive powered flux and an inert gas atmosphere.
Vacuum Brazing
Components are heated in a high vacuum, completely free of oxygen. The clad alloy must contain magnesium as an alloying addition. At the brazing temperature, the heat and vacuum causes the magnesium to "boil" out of the molten metal thereby breaking up the brittle oxide skin into small, harmless shards.
Please send us your needs, and we will reply to you within one business day, thanks!
