Copper Strip

We also produce Steel, Aluminum and Copper in sheet and coil products.

We are capable of producing a wide variety of precision strip products to special requirements, and is geared to handle high volumes with tight tolerances. Continuous strip-casting machines produce long, weld-free coils of uniform composition and properties, and automatic electronic gauge-controls maintain consistent thickness.

Copper strip and brass strip Production capacity:
- About 5000ton per month
- Copper foil and brass foil: the thickness from 0.008mm to 0.15mm, all available
- Copper and brass strip: the thickness from 0.15mm to 6.0mm, all available

For copper strip:
- Min trial order 1 ton each thickness
(only for the thickness: 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.1mm, 1.2mm, 1.5mm. For other thickness, the trial order will be 4tons of each thickness)
- Min normal order: 4tons each thickness

For copper foil (copper tape):
- Min trial order 100kg each thickness
(normal thickness: 0.02mm, 0.025mm, 0.03mm, 0.04mm, 0.05mm, 0.06mm, 0.07mm, 0.08mm, 0.09mm, 0.10mm, 0.12mm, 0.15mm)
- Min normal order: 300kgs each thickness

Applications for copper strip and brass Strip:
Copper strip for CCA, CCS.
Copper strip and sheet for Radiator
Copper strip and sheet for Transformer
Copper strip for Water Heater exchanger unit
Copper strip for Automotive manufacturers
Brass strip and sheet for Electrical equipment manufacturers
Copper strip and brass strip and bronze strip for Mints (for coinage)
Copper strips for Connectors
Copper strips for Relay Springs
Copper strips for Electronic components