Related Products
- Copper Strip
- Oxygen-Free Copper
- Oxygen free copper tube
- Brass rod
- Brass tube
- LWC copper tube coil
- Pancake Copper Tube Coil
- Capillary copper tube
Popular Products
Gilding metal,copper clad metal strip
Contact now
The surface of copper clad steel strip is covered with copper and the core is superior low carbon steel with the characteristics of well-clad,good shape,nice deep draw ability and conductivity.THe performance of copper clad steel is similar with brass,but the consumption is small.
As the high quality,good performance and low cost,the copper clad steel is used in production of stamping and drawing parts,covering parts and connectors.
At present,it is the best substitution of the copper strip which used in the areas of electronic,communication.hardware.decoration and radiators.
Copper clading metal strip Production capacity:
- About 5000ton per month
- Gilding Metal Clad Steel Sheet: the thickness from 0.05mm to 3.55mm, all available
- Gilding Metal Clad Steel strip: the thickness from 0.20mm to 1.20mm, all available
- Gilding Metal Clad Steel width: 120mm,160mm and etc
Especially For the Hard Copper clading metal strip thickness of 0.20mm,0.28mm and 0.30mm(the tensile strength ≥ 600MPa)
For gilding metal strip:
- Min trial order 2 ton each thickness
- Min normal order 5 tons each thickness
The Mechanical property and chemical composition standard: the China Military standard and the Deep Drawing EN10139/10140
The Gilding metal for making bullets, cartridges and electronical stamping.
Thickness: 0.20-3.55mm, the clading thickness is 4-6% of the base steel per side
Width: 120mm, 140mm, 160mm and etc
Material: deep drawing based steel,brass(CuZn90,CuZn10,CuZn85,etc)
F18,F11
Please send us your needs, and we will reply to you within one business day, thanks!
