Easy to Pull a Marine Anchor I

Not everyone has a windlass or needs one. Here’s the easy way to weigh anchor without the work.One of the oldest and most basic devices found on any ship is the anchor. Some of the earliest anchors discovered by archaeologists date back to the Sea of Galilee more than 2,500 years ago. They are simply round, heavy stones with a rope around them to secure the rope. 

A simple but effective invention may be due to rumors that the old crew is very annoyed to pull the anchor almost as much as today's crew. For this reason, a proactive sailor invented the earliest hoist, which consisted of a wooden wheel with a lever, so that the anchor could be wrapped around the surface rather than pulled up. 

Manually pulling the anchor from the bottom under the best conditions is a lot of work. Increasing the pressure of flowing water or high currents, such as when fixed near a river or entrance, complicates your work. If you are moored in deep water, the number of rides can easily become hundreds of feet, which makes it more stable. Properly assembled ground block - this is the term used by the crew to properly assemble the anchoring system - not only a heavy anchor can handle it, but also a fairly long chain that helps the anchor build a good bite at the bottom and keep it fit The angle of the anchor and the boat to keep its grip. 


If you are investigating a recreational boat today, you will find that most do not have an electric windlass, so we are still in the era of anchoring... or us? There is an easy way to lift the anchor from the bottom and use the power of the marine engine to complete the mission. Even better, it is inexpensive, easy to use, and can work under any conditions, regardless of the depth of the water, how strong the current is, or how long it takes to get back the anchor.

For our full list of products that we offer check out our website here. Be sure to join the conversation in our LinkedIn groupFacebook, and Twitter. Try also our WeChat by scanning the QR code below. 


Annette X.//SMC Editor