Pipe thickness: 2.5mm-5mm
Connection end: Flange/ U plate/ nuts
Surface treatment: Hot dip galvanizing 65~100 μm
1.Anchor with flange
The end of part is welded with flange which is easy for connections. This type is usually used for buildings and wharf because of its high accuracy and stability.
2.Anchor with U plate
The end of part is weld with U shape plate, this kind of anchor has good performance in connection and easy for operation. Normally used for fence and barrier.
3.Anchor with nuts
This type of anchor is fixed by three or four nuts which means easy for installation. It’s insert length can be adjusted according to customer demands. Normally used for the base of solar panels.
4.Made to order
Pipe thickness: 2.5/3.0/3.75/4.0mm or according to customer requirement(2.5mm-5mm)
Out diameter: 38/48/60/68/76/89/102/108/114/127/133/140/160/210mm
Material: Q235/ASTM A36
Surface treatment: Hot dip galvanized to DIN EN ISO 1461-1999
Minimum order quantity (MOQ): 500 pcs
1)pole anchor packed in cartons and fixed by steel pallets;
2)Bulk on pallets with four corner protector and wooden board on the top, two PP/steel strips and stretch film wrapped on pallets.
For the part less than 10kg each, there will be about 150pcs/ pallet, 2100pcs/20’container. Quantity tolerance: ±10%
Base of solar panel
Base of fence
Base of sign
Base of container house、cabin
Base of flagpole
We will contact with you within 8 hours