Thickness: 0.3mm - 3.0mm

Width: 600mm - 1500mm, or as per client's needs

Aluminum Coating Weight: 60GSM to 310GSM

Product Detail | Technical Information | More

Product Detail

Shanghai Metal Corporation is a professional manufacturer and supplier of Aluminized Steel Sheet/ Plate with high quality and reasonable price.

Aluminized steel is carbon steel that has been coated with an aluminum-silicon alloy through a process called hot-dipping. The technique creates a tight metallurgical bond between the base metal and its alloy coating to give the new material a combination of steel and aluminum’s best characteristics. Aluminized steel has steel’s strength while also maintaining aluminum’s advantageous surface qualities. It also has good form-ability. So metallurgists can bend, fold, corrugate, and roll it without breaking.

If you want to know more about Aluminized Steel Sheet/ Plate price please feel free to contact us, we will reply you within 24 hours

1. Standard: JIS G3314, ASTM A 463

2. Grade: SA1C, SA1A, SA1D, SA1E

3. Thickness: 0.3mm - 3.0mm

4. Width: 600mm-1500mm, or as per client's needs

5. Surface treatment: oiled, passivated, passivation+oils etc.

6. Aluminum (silicon )coating: AS40 - AS300

1. Muffler, Exhaust System, Heat Shield, Insulation

2. Furnaces, Ovens, Chimney Linings, Outdoor grills

3. Home appliance Toasters, space heaters and Water Heaters exterior applications or for wet areas (air conditioners)

4. Outdoor furniture, greenhouses, and playground equipment

Technical Information of Aluminized Steel Sheet/ Plate:

Standard and Grade
Class		JIS G3314	ASTM A 463
Commercial Quality	CQ	SA1C	CQ
Drawing Quality	DQ1	SA1A	ADQ
	DQ2	SA1D	DQ
	DQ3	SA1E	DQSK
	EDDQ	-	EDDQ
Structural Quality	Geade A	SAC31	SQ-A
	Grade B	SAC35	SQ-B
	Grade C	SAC41	SQ-C
	Grade D	SAC45	SQ-D

Mechanical Properties
Class			Tensile Strength (Kg/mm2)	Yield Point (kg/mm2)		Elongation (%)
Class			Tensile Strength (Kg/mm2)	T ≤ 0.5mm	0.5mm < T	T ≤ 0.5mm	0.5 < T ≤ 1.2mm	1.2mm < T
Structural Quality	Grade A	SAC31, SQ-A	31min	21min	21min	20min	20min	20min
	Grade B	SAC35, SQ-B	35min	25min	25min	20min	20min	20min
	Grade C	SAC41, SQ-C	41min	30min	30min	18min	18min	18min
	Grade D	SAC45, SQ-D	45min	37min	37min	18min	18min	18min

Advantageous Properties:

• High Temperature Resistance – the aluminum-silicon coating of aluminized steel makes the material resistant to high temperatures. In fact, it can withstand up to 900° F, much higher than galvanized steel’s limit of 392° F.

• Low Thermal Expansion Coefficient – Aluminized steel has a relatively lower thermal expansion coefficient, which means it’s less likely to deform under heat stress. This is its advantage over stainless steel.

• Corrosion Resistance – Aluminized steel is more corrosion-resistant than both carbon steel and aluminum because the aluminum oxide that forms during hot-dipping protects the base metal.

• Superior Heat Reflectivity – The highly elegant surface of Aluminized Steel reflects about 80% of heat at a temperature of 450 degrees Celsius. Its reflection rate goes up to 95% where infrared says are present. This makes Aluminized Steel the ideal choice for producing the heat reflector plates in toaster, oven, gas ranges and oil stoves.

Aluminized steel is relatively new in the industry, but it has already become a material of choice for its unique set of properties. Additionally, it’s more economical than common materials like stainless steel.

Case Study

Products & Service

Aluminized Steel Sheet/ Plate

Metal