Grade: GH4145/N07750/Inconel x-750/NCF750B

     

    Density: 8.25g/cm³

     

    Melting point: 1395-1425℃

     

    Tensile Strength: 1180

     

    Yield strength: 790

Shanghai Metal Corporation is a leading Inconel X-750 Strip for Lead Frames manufacturer and supplier.

Inconel alloy mainly X - 750 gamma "[Ni3 (Al, Ti, Nb)] in the ageing strengthening, nickel-based superalloy under 980 ℃ has good corrosion resistance and oxidation resistance, under 800 ℃ has high strength, good relaxation resistance under 540 ℃, at the same time also has good formability and weldability.This alloy is mainly used in the manufacture of aircraft engine work under 800 ℃ and the relaxation resistance of high strength required flat spring and helical spring.It can also be used to make turbine blades and other parts.The products available are sheet, strip, bar, forging, ring, wire and pipe.

If you want to know more about our Inconel X-750 product and Invar product price please feel free to contact us, we will reply you within 24 hours.


  • 1. It can be used to make parts such as turbine blades

    2. It can be used to make high strength slack-resistant planar springs and coil springs for aerospace engines

    3. Rocket engine thrust chamber

    4. Thrust device on the aircraft

    5. High pressure container

    6. Pallets, baskets and fixtures used in the heat treatment plant

    7. Wire split annealing and radiation tube, high speed gas burner, wire mesh belt in industrial furnace

    8. Separation tank in ammonia reforming and catalytic support grid in nitric acid manufacturing

    9. Exhaust system components

    10. Combustion chamber of solid waste incinerator

    11. Pipe support and ash handling parts

    12. Components of waste gas detoxification system

    13. Oxygen reheater




  • Hardness Test

    Tensile Strength Test

    Elongation Test

    Yield strength

Technical Information of Inconel X-750 Strip:

C

Cr

Ni+Co

Al

Ti

Fe

Nb+Ta

≤0.08

14.0~17.0

≥70.0

0.40~1.00

2.25~2.75

5.00~9.00

0.70~1.20

 

Co

Mn

Si

S

Cu

P

 

 

 

 

 

1.00

1.00

0.50

0.010

0.50

0.015

 

Treatment process of Inconel X-750 Strip:

 Plate, belt, pipes supply state of 15 to 980 + solution heat treatment system, air cooling. The intermediate heat treatment system of materials and parts can be respectively adopted in the following processes.

Annealing: 955 ~ 1010 , water cooling. 

Weldments annealing before welding: 980 , 1 h. 

Weldments eliminating stress annealing: 900 , moisturizing 2 h.

Eliminating stress annealing: 15 885 +, 24 h, air cooling.

Products & Service
Click here for price
Click
here
for
price
* E-mail
* Country
* Company name
WhatsApp
Tel

Home

Search

Inquiry

Top