Shanghai Metal Corporation is a leading stainless steel strip for pipe making manufacturer and supplier.
Stainless steel water pipes are the best direct drinking water delivery pipes. It has a low water leakage rate and can save valuable water resources. In the 1980s, the leakage rate of water pipes was about 17%. After switching to stainless steel pipes, the water leakage rate dropped to 7%.
The water supply system in the earthquake was destroyed, but the stainless steel water pipe system was intact. In addition, compared with the copper water pipe, the stainless steel water pipe has good water permeability and does not corrode at a high flow rate. Its insulation is also 24 times that of copper tubes.
If you want to know more about our stainless steel products or stainless steel strip for pipe making price please feel free to contact us, we will reply you within 24 hours.
Specifications of Stainless Steel Strip for Pipe Making:
1. Standard: ASTM A240, JIS G4304, G4305, GB/T 4237, GB/T 8165
2. Grade: 200series&300series&400series
3. Thickness: 0.1mm - 3.0mm
4. Width: 3.2mm-550mm
5. Length: as customers' request
6. Surface finish: 2B, BA, Mirror finished, N04, Hair Line, Matt finished, 6K, 8K
7. Manufacture technology: cold drawn/cold rolled/hot rolled
Stainless Steel Strip Production:
Hot rolled stainless steel strip is a semifinished product obtained from the hot rolling of slabs or billets and is produced for conversion by cold rolling.
Cold rolled stainless steel strip is manufactured from hot rolled, annealed and pickled strip by cold rolling on polished rolls. Depending on the thickness desired, the cold rolling requires various numbers of passes through the mill to effect the necessary reduction and to secure the desired surface characteristics and mechanical properties.
Packing Information of Stainless Steel Strip:
Coil ID: 150mm - 610mm
Coil OD: 300mm - 1200mm
Min trial order 5ton each thickness, 1 x 20' per delivery
Shanghai Metal Products are packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might otherwise be caused during storage or transportation.
Q: Are you a trade company or manufacturer?
A: We’re a manufacturer. We can do more processings like polished, round edge etc. after slitting.
Q: Can you provide free sample?
A: Yes, we can if there’re some in stock.
Q: Where is your raw material from?
A: BAOSTEEL, TISCO, POSCO, JISCO etc.
Q: What’s your range of slitting width?
A: It depends on thickness of stainless steel strip. Regularly the max. slitting width is 650mm and the min. is 5mm or less.
Q: What’s your standard package?
A: Our standard package is waterproof paper with wraps, packed on a pallet or in a wooden package if it’s small coil.
We will contact with you within 8 hours